Making Root Beer - FAQ | Craft a Brew | Craft a Brew (2024)

General Questions

If you don’t see your question answered here, shoot us an email at support@craftabrew.com! DO NOT discard anything until you are able to connect with our team - we can help you save your hot sauce!

This kit yields 32 oz of Root Beer Syrup, which yields about 130 oz of finished, fizzy Root Beer! You can carbonate in two 2L bottles (which you’ll need to source) or use the syrup to whip up a glass or Root Beer anytime with store bought seltzer.

Your homemade Root Beer Syrup can be stored in the fridge in a sealed container for 6 weeks. If you carbonate bottles in 2L bottles, we advise drinking them within 1 week. If the bottles are stored in the fridge longer than that, the risk of over-carbonation increases & alcohol content can increase, making the root beer taste ‘off.’

This kit is NOT designed or intended for creating alcoholic root beer. There are 2 ways to carbonate your Root Beer. Naturally carbonating in 2L bottles with the included yeast will create trace amounts of alcohol - a natural byproduct of the fermentation process. The alcohol levels will be extremely low if our instructions are properly followed (less than 0.05%). If you do not want ANY trace of alcohol in your Root Beer, then we recommend using store bought seltzer to carbonate your Root Beer Syrup instead.

Watch our video of the caramelization process from start to finish. You’ll end up with a thin, dark brown/reddish syrup.

Remember, this process is NOT necessary & completely optional. But if you do caramelize sugar for your Root Beer follow these tips for a smooth, experience:

  • Resist the temptation to stop or remove the pan from heat too soon. You DON’T want to interfere with the reaction. It’s a slow & steady process.
  • As the sugar caramelizes you’ll see big bubbles, they’ll release steam. They’ll billow up for most of the process.
  • You’ll observe a change in smell - from sweet to a more nutty or almost-burnt smell - that’s when you know you’re ready to add water. Around this same time, you’ll also notice the layer of bubbles begins to collapse or cave in on itself.
  • When it’s time to add the caramel to your Root Beer Syrup, you can use a spatula or even some of the hot Root Beer “tea” to loosen anything that’s hardened or solidified. can pour hot root beer into the saucepan to loosen.

Bottling

Feel free to use half of your root beer syrup to carbonate in a 2L bottle and save the other half for making instant root beer with seltzer water. This allows you to experiment with both carbonation methods and to get a longer shelf life from your homemade Root Beer Syrup! (2L bottles are best enjoyed within 1 week. Root Beer Syrup can be stored in the fridge for 6 weeks.)

Where do I find bottles?

  • We recommend buying 2 bottles of soda at the store, enjoying them and use the empties. 2 Liter bottles of club soda or seltzer water are usually cheaper than soda. DO NOT use glass bottles or mason jars. If you don’t have bottles right away, you can always store your Root Beer Syrup in a sealed container in the fridge until you’re ready to bottle.

Bottles are firm, but the carbonation is weak. What should I do?

  • If the carbonation is not strong or fizzy enough after you open a chilled bottle, you can re-seal the bottle and store it at room temperature for a few more hours. Remember, the yeast slows down in the fridge but doesn’t go completely dormant or die. The yeast will ‘wake up’ when the temperature warms up and will continue to create CO2. We recommend checking on the bottles every few hours to see how the bottle firms up. Once it’s VERY firm you can return to the fridge.

Bottles are over-carbonated - what should I do?

  • You can gently twist the cap to release some pressure and CO2.

There’s sediment at the bottom of the bottles - is this normal?

  • Yes! If you carbonate in 2L bottles, some of the yeast will settle at the bottom of the bottles. You can keep this out of your glass by pouring slowly, but if any does get into your glass it isn’t harmful.
Making Root Beer - FAQ | Craft a Brew | Craft a Brew (1)

Our Guide to Making Root Beer

Simple instructions for brewing natural root beer the old fashioned way.

View The Guide

If you’re still stumped or don’t see your question answered above - email us atsupport@craftabrew.com. Don’t dump anything until we’ve connected. Including photos in your email will help us help you more efficiently.

Making Root Beer - FAQ | Craft a Brew | Craft a Brew (2)

Join Our Newsletter

Exclusive sales, new products & recipe ideas direct to your inbox.

Making Root Beer - FAQ | Craft a Brew | Craft a Brew (4)

Shop

Information

Quick links

Copyright © 2024 Craft a Brew. All Rights Reserved.

` } }
Making Root Beer - FAQ | Craft a Brew | Craft a Brew (2024)

FAQs

How long does craft a brew take? ›

Our beers feature a 60 minute boil and hops are added at specific times within those 60 minutes.

How long does it take to brew root beer? ›

The carbonation time depends on the type of yeast used and the temperature of the room, though in general it takes between 36 and 72 hours. I found that 48 hours was an appropriate amount of time for my root beer, which was sitting in a 75-degree room. To check carbonation, I just opened a bottle and poured a glass.

How is craft root beer made? ›

Traditional method. One traditional recipe for making root beer involves cooking a syrup from molasses and water, letting the syrup cool for three hours, and combining it with the root ingredients (including sassafras root, sassafras bark, and wintergreen).

What is the science of making root beer? ›

To make root beer, a mix of herbs, bark, berries, and roots would be boiled in water and then strained. Sugar and yeast would be added to the strained water mixture to carbonate the small beer. Through this traditional carbonating process, the yeast microorganisms eat the sugars in the mixture.

How long does it take to brew a craft beer? ›

The short answer is that, on average, it takes about four hours to brew beer, one to two weeks to ferment and condition, two hours to package in bottles, and one to two weeks to naturally carbonate in bottles. So, trom start to finish, on average, it takes anywhere from two to four weeks to make beer.

What is the secret ingredient in root beer? ›

The main ingredients in root beer are pretty much the same as any other soda: water, high fructose corn syrup, caramel coloring, and flavoring, both natural and artificial. However, root beer's unique flavor comes from sassafras, a tree root native to the United States.

What type of sugar is used in root beer? ›

Sweeteners. There are numerous sweetening options when it comes to making root beer: cane sugar, corn sugar, corn syrup (including the favorite of commercial soft drink makers — high fructose corn syrup), malt extract (maltose), brown sugar, beet sugar, maple syrup (use grade B for better flavor), honey or molasses.

What root is used to make root beer? ›

The predominant flavor comes from the roots of sassafras, which one boils with spices and molasses to make a sweet syrup. Sassafras grows wild all over the eastern United States and Canada and traditionally was the main root used for what we call root beer here.

Why do you heat the water when making root beer? ›

If the water is too cold, the yeast cells will not activate. In either situation, the yeast will not be able to produce carbon dioxide and no carbonation would be present in the root beer.

What gives root beer its color? ›

Modern mass-produced root beer is usually made with a proprietary mixture of carbonated water, high-fructose corn syrup or sugar, caramel coloring (to give the product its trademark dark brown appearance), and small amounts of natural and artificial flavorings.

How does fermentation work in root beer? ›

Alcoholic fermentation begins after glucose diffuses into the yeast cell. The glucose is broken down into 2, 3 carbon molecules called pyruvic acid. The pyruvic acid is then converted to CO2, ethanol, and energy for the yeast cell. It is the carbon dioxide produced by the yeasts that give root beer its "fizz."

How long should a brew day take? ›

Your “brew day” is the day you take those four separate ingredients and transform them into the rich, sugary liquid that will eventually — five weeks from now — become a drinkable beer. The brew day happens in four steps, which will take four to five hours to complete.

How long does craft brew last? ›

A good rule of thumb is to consume your craft beer within six months of purchasing it. We can't understand why you would wait that long, but you can. After that time period, expect a certain degree of change to the taste and smell of your beer.

How long should batch brew take? ›

The total brew time should be somewhere between 5-7 mins. We recommended swirling the carafe to ensure the brew is uniform before pouring.

How long does an extract brew take? ›

A typical extract homebrewing session takes about three hours, while an all-grain batch could take up to eight. A typical batch size for most extract and all-grain homebrews is five gallons.

References

Top Articles
Latest Posts
Article information

Author: Golda Nolan II

Last Updated:

Views: 6159

Rating: 4.8 / 5 (58 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Golda Nolan II

Birthday: 1998-05-14

Address: Suite 369 9754 Roberts Pines, West Benitaburgh, NM 69180-7958

Phone: +522993866487

Job: Sales Executive

Hobby: Worldbuilding, Shopping, Quilting, Cooking, Homebrewing, Leather crafting, Pet

Introduction: My name is Golda Nolan II, I am a thoughtful, clever, cute, jolly, brave, powerful, splendid person who loves writing and wants to share my knowledge and understanding with you.